OSN 1800 V Overview
The Huawei OptiX OSN 1800 V is a new-generation packet enhanced multi-service optical transport platform that supports unified switching of OTN/PKT/SDH services and access of any 2M to 100G services such as Ethernet, TDM, and private line services. In addition, the OSN 1800 V integrates the Multiprotocol Label Switching traffic policing (MPLS-TP) functions to optimize fiber resource usage in metro networks, and provides cost-effective, efficient service transmission solutions for sectors such as finance, media, government, energy, and education.
Huawei OSN 1800 V provides Ethernet passive optical network (EPON) and Gigabit passive optical network (GPON) service interfaces, to meet the demands on fiber quantity and capacity. of PON On the other hand, as WDM can transport longer, the ONUs can be deployed further from the OLT and hence enlarged PON coverage. The LOS/LOF alarm detection is also provided for easy fault locating in the network.
Highlights of OSN 1800 V
-
MS-OTN compliance and compact design (5 U high), supporting access of Any-rate services
- A single chassis supports full-granularity cross-connections and multiplexing (only Z-series cross-connections support ODU3). It allows for a maximum of 700 Gbit/s OTN capacity, 700 Gbit/s packet capacity, 280 Gbit/s SDH higher-order and 40 Gbit/s SDH lower-order capacities, and supports ODUk (k = 0, 1, 2, 2e, 3, 4, C2, flex). This significantly improves line bandwidth usage.
- The 1800 V supports universal line boards, allowing services after being scheduled on the OTN, SDH, PKT service planes to hitlessly share line transmission bandwidth.
- Being highly integrated, each 1800 V chassis is 5 U high and provides a maximum of 15 service slots.
- Targeted for metro edge applications, the 1800 V can be deployed as a service access or aggregation node, and supports uniform of full services (2 Mbit/s to 100 Gbit/s).
-
Environment friendly, power saving, and easy to deploy and maintain
- OSN 1800 V Supports power saving and consumes low power in a typical configuration, reducing OPEX for customers.
- Easy to deploy, supports installation in a 19-inch or ETSI cabinet and AC and DC power supplies.
- Supports OTN inband management compliant with ITU-T G.709.
-
Distinguished architecture, high reliability, and secure data transmission
- OSN 1800 V Provides various network-level protection schemes for all-around service protection.
- Provides equipment-level protection: power supply protection, fan protection, and 1+1 protection for system control, cross-connect, and clock integrated boards.
-
Built-in pulse code modulation (PCM) provides an all-in-one solution to satisfy enterprise customers’ requirements on low-speed service access. Built-in PCM has the following features:
- Reduces types of devices, delayering the network.
- Operates on a universal transmission platform, facilitating network expansion and evolution.
- Supports fast fault locating using the unified NMS.
Specifications of OSN 1800 V
Item |
Specifications |
|
---|---|---|
Dimensions (H x W x D) |
221.5 mm x 442 mm x 220 mm (excluding mounting ears) |
|
Weight (empty chassis) |
8.0 kg |
|
Installation mode |
|
|
Number of slots for service boards |
|
|
Optical switching capability |
1- to 9-degree ROADM |
|
Maximum electrical switching capacity
|
OTN |
700 Gbit/s |
Packet |
700 Gbit/s |
|
TDM |
Higher order connect: 280 Gbit/s, lower order connect: 40 Gbit/s |
|
Maximum number of wavelengths |
DWDM |
96 wavelengths |
CWDM |
8 wavelengths |
|
Center wavelength range |
|
|
Supported service type |
SDH/SONET, PDH, OTN, OSU, Ethernet, PCM, CPRI, OBSAI, SAN, video, and other services |
|
Maximum single-channel rate |
400 Gbit/s |
|
Line rate |
1.25 Gbit/s, 2.5 Gbit/s, 10 Gbit/s, 50 Gbit/s, 100 Gbit/s, 200 Gbit/s, 400 Gbit/s |
|
Maximum number of OSN 810 and OSN 850 devices that can be managed by an OSN 1800 NE |
50 NOTE: The quantity depends on the number of actually inserted C12X5 and C15Xn boards on the NE and the boards interconnected to the OSN 850 devices. |
|
Pluggable optical/electrical module |
|
|
Topology |
P2P, chain, star, ring, ring with chain, intersecting ring, tangent ring, mesh |
|
Network-level protection (OTN) |
Client 1+1 protection, intra-board 1+1 protection, ODUk SNCP, optical line protection, tributary SNCP, LPT |
|
Network-level protection (packet) |
Tunnel APS, PW APS/FPS, MC-PW APS, MC-LAG, LPT, LAG, ERPS, MRPS, LMSP, packet SNCP |
|
Network-level protection (TDM) |
|
|
Device-level protection |
|
|
Encryption type |
|
|
TSDN
|
|
|
Optical power management |
ALS, AGC, OPA, IPA |
|
Maintenance |
|
|
Easy O&M |
Optical Doctor (OD) system, Fiber Doctor (FD) system |
|
Synchronization |
|
|
ASON |
OTN network: electrical-layer ASON and optical-layer ASON (supported only by Z-series cross-connect boards) OCS network: SDH ASON (Z5UXCMS/Z6UXCMS/Z5XCS) OCS network: 2M ASON (Z5UXCMS/Z6UXCMS/Z5XCS) |
|
Standard working voltage |
DC power supply
AC power supply
|
|
Device running environment |
Chassis temperature |
|
Chassis relative humidity |
|
|
ETSI standard |
ETSI Class 3.1 NOTE: The ETSI standards define the temperature and humidity of the equipment room. |
|
Reliability |
Mean time to repair (MTTR) |
1 hourb NOTE: The MTTR is related to the specific configuration of a device, including the average time for locating a fixed fault on site, replacing a board, restarting the device, and recovering services. The traveling time is not included. |
Mean time between failures (MTBF) |
129.63 yearsb |
|
Availability |
99.9999119%b |
|
a: “Short term” refers to a maximum of 96 consecutive operating hours and a total operating time of no more than 15 days in a year. b: The preceding parameter values are calculated based on the typical product configuration. The parameters vary according to the configuration module. |
Reviews
There are no reviews yet.