IES-1062FX Series
Giá: Liên hệ
- IES-1080 provide 8×10/100Base-T(X) ports
- IES-1062GT provide 6×10/100Base-T(X) and 2×10/100/1000Base-T(X) ports
- IES-1062FX series provide 6×10/100Base-T(X) and 2x100Base-FX fiber ports
- IES-1062GF series provide 6×10/100Base-T(X) and 2x1000Base-X fiber ports
- Triple redundant DC power inputs of terminal block and power jack
- Support auto-negotiation and auto-MDI/MDI-X
- Support store and forw ard transmission
- Support flow control
- Warning system by relay output
- Rigid IP-30 housing design
- DIN-Rail and wall mounting enabled
 Specifications |
|||
| ORing Switch Model | IES-1062FX-MM-SC | IES -1062FX-SS-SC | |
| Physical Ports | |||
| 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX | 6 | 6 | |
| Fiber Ports Number | 2 | 2 | |
| Fiber Ports Standard | 100Base-FX | 100Base-FX | |
| Fiber Mode | Multi-mode | Single-mode | |
| Fiber Diameter (μm) | 62.5/125 μm 50/125 μm |
9/125 μm | |
| Fiber Optical Connector | SC | SC | |
| Fiber Ports Specifications Typical Distance (km) | 2 km | 30 km | |
| Wavelength (nm) | 1310 nm | 1310 nm | |
| Max. Output Optical Power (dBm) | -14 dBm | -8 dBm | |
| Min. Output Optical Power (dBm) | -23.5 dBm | -15 dBm | |
| Max. Input Optical Power(Saturation) | 0 dBm | 0 dBm | |
| Min. Input Optical Power (Sensitivity) | -31 dBm | -34 dBm | |
| Link Budget (dB) | 7.5 dB | 19 dB | |
| Technology | |||
| Ethernet Standards | IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.3z for 1000Base-X IEEE 802.3x for Flow control |
||
| MAC Table | 8192 MAC addresses | ||
| Processing | Store-and-Forward | ||
| LED Indicators | |||
| Power Indicator | Green : Power LED x 3 | ||
| Fault Indicator | Amber : Indicates PWR1 or PWR2 failure occurred | ||
| 10/100Base-FX RJ45 Port Indicator | Green for port Link/Act. Amber for Duplex/Collision | ||
| 10/100/1000Base-T(X) / Fiber Port Indicator | Green for port Link/Act. Amber for Link | ||
| Fault contact | |||
| Relay | Relay output to carry capacity of 1A at 24VDC | ||
| Power | |||
| Redundant Input Power | Triple DC inputs. 12~48VDC on 7-pin terminal block, 12~45VDC on power jack | ||
| Power Consumption (Typ.) | 8 watts | 8 watts | |
| Overload Current Protection | Present | ||
| Reverse Polarity Protection | Present on terminal block | ||
| Physical Characteristics | |||
| Enclosure | IP-30 | ||
| Dimensions (W x D x H) | 52(W) x 106.1(D) x 144.3(H) mm (2.05×4.18×5.68 inch.) | ||
| Weight (g) | 680 g | 680 g | |
| Environmental | |||
| Storage Temperature | -40 to 85°C (-40 to 185°F) | ||
| Operating Temperature | -40 to 70°C (-40 to 158°F) | ||
| Operating Humidity | 5% to 95% Non-condensing | ||
| Regulatory Approvals | |||
| EMI | FCC Part 15, CISPR (EN55022) class A, | ||
| EMS | IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11 | ||
| Shock | IEC60068-2-27 | ||
| Free Fall | IEC60068-2-32 | ||
| Vibration | IEC60068-2-6 | ||
| Safety | EN60950-1, UL508(E331061) | ||
| MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ) | 354,989 | 354,989 | |
| Warranty | 5 years | ||
| Fiber Mode | Multi-Mode, Single-Mode |
|---|
Be the first to review “IES-1062FX Series”
Related products
Reviews
There are no reviews yet.