Lọc

OSN 1800 II Enhanced

Giá: Liên hệ

Product name: Huawei Optix OSN 1800 II Enhanced

Dimensions (W x D x H): 442 mm x 220 mm x 88 mm (excluding mounting ears)

Supported service type: SDH/SONET, PDH, OTN, Ethernet, PCM, CPRI, OBSAI, SAN, video, and other services

Maximum single-channel rate: 200 Gbit/s

Line rate: 1.25 Gbit/s, 2.5 Gbit/s, 10 Gbit/s, 50 Gbit/s, 100 Gbit/s, 200 Gbit/s

Danh mục: Optix OSN 1800 Series Thẻ: huawei, osn

Mô tả
Đánh giá (0)

Highlights of OSN 1800 II Enhanced

MS-OTN compliance, supporting access of any-rate services over a single network
- A single chassis supports full-granularity cross-connections and multiplexing. It allows for a maximum of 200 Gbit/s OTN capacity, 160 Gbit/s packet capacity, 50 Gbit/s SDH higher-order and 20 Gbit/s SDH lower-order capacities, and supports ODUk (k = 0, 1, 2, 2e, 3, 4, C2, flex).
- The 1800 II Enhanced supports universal line boards, allowing services after being scheduled on the OTN, SDH, PKT service planes to hitlessly share line transmission bandwidth.
- Encapsulates all services, from low-rate services (such as FE services) to high-bandwidth services, into OTN frames for transmission.
Environmentally Friendly, Power Saving, and Easy to Deploy and Maintain
- 2 U compact chassis: supports power saving and consumes low power in a typical configuration, helping customers reduce their OPEX.
- Easy to deploy and supports a broad range of applications: 19-inch or ETSI rack mounting and available in DC version.
- ITU-T G.709 compliant OTN inband management.
Distinguished architecture, high reliability, and secure data transmission
- Provides various network-level protection schemes for all-around service protection.
- Provides equipment-level protection: power supply protection, fan protection, and 1+1 protection for system control, cross-connect, and clock integrated boards.

Specifications of OSN 1800 II Enhanced

Item		Specifications
Appearance
Dimensions (W x D x H)		442 mm x 220 mm x 88 mm (excluding mounting ears)
Weight (empty chassis)		3.6 kg
Installation mode		19-inch cabinet ETSI 300 mm deep cabinet, such as A63B and N63B F01S300 cabinet
Number of slots for service boards		DC chassis: 6 AC chassis: 4
Optical switching capability		1- to 9-degree ROADM
Electrical switching capacity	OTN	OTN capacity: 160 Gbit/s (OTN+PKT+SDH) OTN capacity: 200 Gbit/s (OTN+SDH)
	Packet	Packet switching capacity: 160 Gbit/s (128 bytes) Packet processing capability: 150 Mpps (64 bytes)
	TDM	Higher-order capacity: 50 Gbit/s; lower-order capacity: 20 Gbit/s
Maximum number of wavelengths	DWDM	96 wavelengths
Maximum number of wavelengths	CWDM	8 wavelengths
Center wavelength range		DWDM: 1529.16 nm to 1567.13 nm (extended C band, ITU-T G.694.1) CWDM: 1471 nm to 1611 nm (S+C+L band, ITU-T G.694.2)
Supported service type		SDH/SONET, PDH, OTN, Ethernet, PCM, CPRI, OBSAI, SAN, video, and other services
Maximum single-channel rate		200 Gbit/s
Line rate		1.25 Gbit/s, 2.5 Gbit/s, 10 Gbit/s, 50 Gbit/s, 100 Gbit/s, 200 Gbit/s
Maximum number of OSN 810 and OSN 850 devices that can be managed by an OSN 1800 NE		50 NOTE: The quantity depends on the number of actually inserted C12X5 and C15Xn boards on the NE and the boards interconnected to the OSN 850 devices.
Pluggable optical/electrical module		Optical module: SFP/eSFP, XFP, SFP+, QSFP+, TXFP, CFP, CFP2, QSFP28 Electrical module: GE SFP, STM-1 SFP
Topology		Point-to-point, chain, star, ring, ring with chain, intersecting ring, tangent ring
Network-level protection (OTN)		Client 1+1 protection, intra-board 1+1 protection, ODUk SNCP, optical line protection, tributary SNCP, LPT
Network-level protection (packet)		Tunnel APS, PW APS/FPS, LPT, LAG, ERPS, LMSP, packet SNCP, MRPS
Network-level protection (TDM)		SDH protection: SNCP, linear MSP, ring MSP EoS protection: LAG, DLAG, LCAS, LPT, STP/RSTP, BPS
Device-level protection		Cross-connect, system control, and clock integrated board redundancy Power supply backup Fan redundancy
Encryption type		Client-side bidirectional service encryption Line-side bidirectional service encryption
TSDN		E2E fast service provisioning Bandwidth on demand (BoD) Scheduled service provisioning (BC) Visualized resource utilization Latency map
Optical power management		ALS, AGC, OPA, IPA
Maintenance		MPLS-TP OAM ETH OAM Port mirroring (EoS) Port traffic mirroring (packet) Loopback PRBS LLDP
Simple O&M		Optical Doctor (OD) system, Fiber Doctor (FD) system
Synchronization		Physical clock (OTN & Packet & SDH) IEEE 1588v2 (OTN & Packet) ITU-T G.8275.1/G.8273.2 (OTN & Packet)
ASON		OTN: optical-layer ASON (supported only when the Z2UXCL/Z3UXCL board is used)
Power supply		DC power supply Standard operating voltage: –48 V to –60 V Operating voltage range: –40 V to –72 V AC power supply Standard operating voltage: 100 V to 240 V Operating voltage range: 90 V to 264 V
Device running environment	Chassis temperature	Long term: –5°C to +50°C Short term^a: –10°C to +55°C
	Chassis relative humidity	Long term: 5% to 85% Short term: 5% to 95%
	ETSI standard	ETSI Class 3.1 NOTE: The ETSI standards define the temperature and humidity of the equipment room.
Reliability indicators	Mean time to repair (MTTR)	1 hour^b NOTE: The MTTR is related to the specific configuration of a device, including the average time for locating a fixed fault on site, replacing a board, restarting the device, and recovering services. The traveling time is not included.
	Mean time between failures (MTBF)	135.87 years^b
	Availability	99.999916%^b
a: A short term refers to a maximum of 96 consecutive operating hours and a total operating time of no more than 15 days in a year. b: The preceding parameter values are calculated based on the typical product configuration. The parameters vary according to the configuration module.